K2 TIRE DOKTOR 400 ML

Tire Inflator, Effectively seals tires up to size 14”

Product index: B310
Barcode: 5906534038982
  • Description

    FAST INFLATION AND EFFECTIVE SEALING
    K2 Tire Doktor is a spare wheel in a spray that quickly and effectively inflates and seals punctured tyres – a temporary repair without disassembly or tools. The aerosol inflates the tyre, while a special latex-based formula seals the puncture. The product does not affect wheel balance. Suitable for tyres up to 14".

    NO DISASSEMBLY OR TOOLS REQUIRED
    Extremely helpful in unexpected situations. Helps avoid the hassle of replacing a damaged wheel with a spare. An essential product for every car trunk.

    SAFE FOR TYRES
    The product does not damage tyres and can be easily removed later at a tyre service workshop.

    DIRECTIONS:
    Shake well before use.
    If possible, remove the object that caused the puncture.
    Screw the plastic hose onto the tyre valve.
    Holding the can upside down, empty it completely into the tyre.
    Drive approximately 10 km at a maximum speed of 50 km/h to allow the product to distribute evenly inside the tyre.

    NOTE: Do not use in case of large punctures, severe tyre damage or if the tyre has come off the rim. Visit a workshop as soon as possible for permanent repair. Inform the mechanic that the tyre contains flammable gas. Show the product packaging to the mechanic. Before carrying out the final repair, the tyre must be deflated and reinflated three times until the flammable substance has been completely removed.

  • Security

    SAFETY WARNINGS

    Danger: Extremely flammable aerosol. Pressurised container: May burst if heated. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Use only outdoors or in a well-ventilated area. Protect from sunlight. Do no expose to temperatures exceeding 50°C. Dispose of contents/ container to waste container. 

    MANUFACTURER / ENTITY RESPONSIBLE FOR INTRODUCING THE PRODUCT TO THE EUROPEAN UNION MARKET

    Melle Sp. z o. o., Stary Staw 9, 63-400 Ostrów Wlkp., Poland, EU, +48 62 737 88 00, www.k2.com.pl, www.k2-global.com, info@melle.com

  • Presentation

  • Movie

    • 1
    • 2